Vacuum oven equipped with stainless liner, independent relay control and accurate temperature control. Heated, vacuum pumping and nitrogen filling are controlled by buttons. In the middle, there is one φ3″×D630mm cantilever shaft which withstand 250kg material.
Vacuum oven equipped with stainless liner, independent relay control and accurate temperature control. Heated, vacuum pumping and nitrogen filling are controlled by buttons. In the middle, there is one φ3″×D630mm cantilever shaft which withstand 250kg material.
Key Features
â— It adops pneumatic valve, vacuuming and nitrogen filling, which has high efficiency, saves personnel and has good product performance.
â— 4 cylinders design, 5mm thick stainless steel inner tank, strong corrosion resistance, each one is controlled separated without affecting each other.
â— It adopts 304 stainless steel heating tube coiled liner heating type, and the temperature is controlled evenly.
â— It is sealed with silicone rubber sealing strip, the door is made of 15mm thick tempered glass.
â— The four circular oven is controlled separately, total drying time, cycle time and vacuum pressure can be set separately according to customer.
â— Elastic double-layer glass door with overpressure protection.
â— PID adjustable, small thermal inertia, good temperature control effect.
â— The screen system adopts the centralized operation of the touch screen, which is convenient to operate and reliable to control.
Technical Parameters
Model |
|
Working voltage |
AC380V |
Input voltage |
30KW |
Temperature |
RT ~ 150°C adjustable |
Inner liner dimension |
Ф450mm×D600mm |
Inner chamber temperature error |
±3℃ (No load in vacuum state) |
Heating time |
The temperature rise from room temperature to 100 ℃ in no-load state is less than 40 minutes. The cell core temperature stablization time is 110 minutes. |
Main heating temperature control accuracy |
Displayed temperature accuracy within＜1℃ |
Main heating temperature rise control |
The safety switch is set at 150 ℃ during heating. |
Drying method |
The heating tube surrounds the inner tank for heating |
Vacuum degree |
-0.1Mpa |
Vacuum maintaining time |
≥98% for 24 hours at-0.1MPA |
Control method |
PLC, relay control |
Circulating air system |
Including circulating air system, which can carry out process programming and realize automatic comtrol |
Protection functions |
Automatic overtemperature alarm; Power failure automatic protecion function |
Dimension |
L2050×W1240×H2010mm |
Weight |
≈1000kg |
